Contact sales
Looking for packaging solutions? Learn more or request a free quote.
Supersealer MSB with T-PAK 500 Flat Conveyor
OK Sealer offers a variety of semi-automatic bagging systems that offer you a reliable and versatile bag sealing experience. The semi-automatic T-PAK 500 system comes equipped with a Supersealer medical band sealer, an optional T-PAK Infeed device, SST Top Trimmer and a Trim Remover.
The system is assembled to seal any kind of pouch material for the medical device industry. This system can be used in combination with automatic baggers or multi operators on one line. It’s available in stainless steel construction.
The system is commonly used for applications to lay the product flat.
All the sealers are available in right to left or left to right configurations with various options.
It is CE marked, and runs on 110 or 220 volt, and can be plugged into any wall socket.
The sealers meet ISO 11607-2, ISO 13485, ISO 9001, and EN 868 specifications.
Features | Benefits |
 No tool band change over: | Easy to maintain. |
| Variable Speed: | Ease of matching conveyor speeds and flexibility. |
| Closed Loop PID Temperature Control: | Accurate and consistent sealing temperature. |
| Touch Panel Monitor: | Operators, Managers, QC personnel can always see all variables of the machine at all times, both set and actual. |
| Recipes in PLC: | Pouch/bag change over made easy with menu and load up the next pouch/bag parameters with a touch of a button. Can gold up to 65 recipes |
| Easy Lift Cover: | No tool required for band change with easy access. |
| Motorized Pedestal: | Adjust height with a touch of a button, simplifying multiple bag applications. |
| Plugs into any wall plug: | Minimal utility requirements – 110 or 220 Volt. |
| Out of PLC parameter settings: | No pouch/bag will be sealed out of its parameter settings. The machine will run in reverse if out of its parameters. |
| IQ/OQ sample documents: | Information for the small to mid-size companies that may require an introductory guideline. |
| Packaging of terminally sterilized medical devices: | Meeting: ANSI/AAMI/ASTM, ISO 11607-2, ISO 13485, ISO 9001, and EN 868 standards for compliance. |
TECHNICAL SPECIFICATIONS | |
| Stainless Steel Finish: | Clean and durable for any clean room. |
| Pouch/bag materials: | Heat seal up to 12 mils and will seal a wide range of materials such as Poly/Poly, Tyvek, Mylar, Pet Coated Tyvek, Paper/Poly, Laminated Foil and Metalized Foil. |
| Speed: | Up to 48 ft/min. Other speeds available upon request. |
| Machine Handing: | Right to Left or Left to Right. |
| Electric Requirements: | 110 VAC, 1 PH, 60 Hz, 10 Amp 220 VAC, 1 PH, 50 Hz, 7 Amp CE Marked. |
| Pneumatic: | 80-100 psi clean dry air. |
| Seal width: | 5/16″ wide (11mm). Optional 3/4″ wide. |
| Heat Bars: | One pair (1) 7″ (17.78cm). |
| Cooling Bars: | One pair (1) 5″ (12.7cm). |
| PLC Control: | Touch Panel. |
Add-on Options
- Pouch Top Trimmers
- Trim Removers 3" (76mm) or 5" (127mm)
- Automatic Infeed
- Pouch Coders and Printers
- Conveyors
- Pouch Fillers and Bag Loaders
- Washdown (IP65 or IP69K) and Corrosive Washdown
- Dedusters for difficult dusty environments
- Pouches - OK Sealer can introduce you to the most advanced pouch manufactures on the market
